Posts Tagged ‘rooster

01
Dec
09

November Contest Results

3rd place goes to Darwin for his Sweater cock.

2nd place goes to lovesgamebirds for his Bourbon Red Tom.

1st place goes to Mice75 for her Minohiki cock.

Congratulations to all the winners, and thanks for all the great pics that were submitted this month. If you want to enter your birds in our free monthly photo contest, just go to the Ultimate Fowl Forum, and sign up!

01
Nov
09

October Contest Results

3rd place goes to GomerParry for his Malay bantam.

2nd place goes to Decoyman for his blue light brown Dutch bantam rooster.

1st place goes to SOLTADOR for his orange red Oxford Game.

Congratulations to all the winners, and thanks for all the great pics that were submitted this month. If you want to enter your birds in our free monthly photo contest, just go to the Ultimate Fowl Forum, and sign up!

18
Oct
09

Improving your chickens through breeding

by Chuck Everett

The whole act of preservation of our rare breeds begins and ends with patience. It has often been stated that patience is a virtue. When dealing with rare breeds’ patience is not a virtue; it is a requirement! Certainly patience can be a learned behavior. Maybe it can even be acquired over time. I just wish folks wouldn’t try to learn or acquire it with the rare breeds with which I’m working. I don’t wish to sound harsh: just honest. This year alone I have mailed out somewhere between three and four hundred hatching eggs all of rare breeds. It is always depressing to here that the folks who were so eager to receive the eggs have dropped the said rare breed in a year or so because they didn’t realize how much patience this whole process was going to take. Many of our rare breeds have fallen into a state of mediocrity or worse. It takes years and years of work to bring them back from the brink of extinction to a place where they even approach the Standard description.

I’ll get calls that ask why the leg color is wrong, or why the weight is not up to Standard, or if there is anyone else raising the breed that is further along. Oh, might I add that most of these calls come from the folks that I felt sorry for and I sent them the eggs for FREE. All I ask for many times is the cost of the postage and about half the time that isn’t even sent back to me. I just figure they needed the money worst than I did and write it off: back to the calls. I usually begin by asking, ‘You know these are rare breeds don’t you?’

After I receive an affirmative answer, I then ask what attracted them to the breed. Nine times out of ten that is when I find out that they wanted to be different, to standout at the local poultry show, and to brag to all their “going green” suburban friends that they were saving a piece of living history. No where did I hear anything about patience or hard work or the challenge of breeding for improvement. I didn’t hear any of these things because these folks either weren’t aware of the need for improvement or it never even crossed their little minds. So, this article is meant to inform folks before they call for hatching eggs or chicks.

1. Rare breeds need improvement. The improvement could be related to health and vigor, type or feather color. Possibly it might include all of these things. It is important to remember that there is no perfect fowl. They all have some fault somewhere. Even the best of the show strains still throw chicks with faults. It is only more so with rare breeds.

2. Improvement requires patience. In the first years of working with a breed you will see some dramatic improvements that come about by simple selection processes. However, this all slows down after those first few generations. Sometimes, it even seems that you go backward instead of forward.

3. Improvement requires culling. Culling is a part of the selection process. It begins when the chicks hatch and continues all the way to the breed pen. The harder you cull the faster will be your improvement: provided you have hatched plenty of chicks. If you can’t cull a bird then don’t call me or any other breeder for stock. You are wasting our time and taking away potential birds from our breeding stock.

4. Improvement requires a basic working knowledge of the breed you wish to improve. This may seem rather obvious. Yet, there are lots of folks out there who don’t own a Standard and aren’t planning on breeding to the Standard. How else can you seek to improve a breed unless you have a Standard to guide you? If your breed of choice is not included in the APA or ABA Standard then you should research the breed and find out of there exist a Standard from the breeds country of origin or from another country that has written Standards.

5. Improvement comes with hands-on experience. I believe in research and study; otherwise I would never have done the hard work required for my master’s and doctorate degrees. That said experience is the best teacher. Reading about something and doing it are two totally different things. As a matter of fact, don’t believe everything you read: especially on the Internet. Any fool can put something online. It doesn’t make it true just because it is in print. Also, be very careful concerning old poultry material. Years ago there existed many opinions that reflected the wisdom of the day which has now been proven to be untrue. Even the description of our old breeds in these older poultry records can not often be trusted. During the 19th century many writers quoted other writers as if they were speaking from personal knowledge. What they quoted might not have been true at all.

6. Improvement requires an understanding of breeding and breeding systems. One of the great things about raising chickens is that I get to breed they way I want too: so do you. Yet, there are still some basic breeding systems that have been proven through the years. You don’t have to reinvent the wheel. Read about these systems, talk with others and decide what would be the best fit for you.

7. Improvement requires good management. Management includes everything from feed to housing. I have found that if I free-range my young stock they are healthier throughout the remainder of their lives. There is no substitute for green grass and sunshine. A good start is essential to good birds. Birds need to be routinely wormed and sprayed for lice and mites. There housing needs to fit your particular location. You’re not running a hospital, but the housing should still be cleaned and sprayed periodically.

8. Improvement is enhanced by sharing stock with other serious breeders. Now we were all new once upon a time. I don’t want to discourage you from sharing stock with new folks at all; just make sure they know what they are getting into. Whether you give stock away, trade it or sell it, you need to be honest about the quality of the stock. Sharing stock will give you a person to go back to should your line need freshening up or should something happen to your birds. The person you share with might be a better breeder even than yourself; thus, you can get birds from your on line that end up being better than your own.

It has not been my goal to discourage anyone from raising and breeding rare breeds of poultry. On the contrary, I have only meant to encourage and inform. Raising and breeding rare breeds is my passion. This year alone I have hatched over 400 chicks of the rare breeds I keep. I plan to keep only a few of these birds. The remainder will be eaten by my family, given away to friends, or sold at poultry shows I attend. I begin hatching each year during Christmas week and continue to do so until the first week of June. That means that I’m setting eggs every 7 to 10 days during that entire time. Poultry is my passion; improvement is my goal!

For more information on breeding, and preservation of poultry, visit the Society for the Preservation of Poultry Antiquities. You can also reach Mr. Everett at the Ultimate Fowl Forum.

01
Oct
09

September Photo Contest

3rd place goes to Doc and his blue/red Asil .

2nd place goes to Stigy and his grey hen.

1st place goes to Cubakid for this wonderful pic of his Cubalaya flock!

Congratulations to all the winners, and thanks for all the great pics that were submitted this month. If you want to enter your birds in our free monthly photo contest, just go to the Ultimate Fowl Forum, and sign up!

16
Jun
09

Trimming Chickens Spurs & Toenails

Trimming spurs on roosters is primarily done for several reasons. Most people trim them to help protect their hen’s back from getting punctured from being topped, but they also need trimmed to avoid injuries from roosters sparring, and in extreme cases, to allow them to walk easier. There are basically two methods for doing this, cutting the spur with a saw, or twisting the spur off with pliers. The method I prefer is to cut the spurs off because when you are done, you will have short, blunt spurs that will be as safe to your other chickens as possible. If you decide to twist off the spurs, you will have short spurs, but they will still be sharp, and can still do damage.

Cutting off spurs is very simple, and does not hurt your chickens at all. Spurs have an inner core, which is the live part, and an outer husk, which is the hard horn type material. When you trim the spur, you are cutting the outer husk. The trick is to not cut into the inner core, which can bleed. The first thing you will need to do is to immobilize your bird. What I have found works well for this is to take an old towel, fold it in half, lay the bird down on it, hold the wings tight to the body, and leaving only the head and legs sticking out, roll the bird in the towel nice and snug. By doing this, it will allow you to work on his spurs much easier, and even do it by yourself! After securing the bird, you will need to decide where you need to cut the spur off. As a rule of thumb, I have found that the length of the inner core is approximately three times the size of the diameter of the spur itself, which on most standard sized, mature roosters will be about 5/8 of an inch away from the leg. Next, grab the spur at the base, while supporting the leg at the same time. Doing this is very important as the saw can grab while cutting, and you don’t want to excessively torque the spur which can actually break the connection of it to the leg bone. Next, use a small, fine toothed hacksaw to cut the spur off. I find it works best to use short, light strokes with the saw. Some people prefer to use a rotary tool to do this, if you do, just make sure that you don’t inadvertently hit the leg, or your fingers for that matter, because it will cut anything it touches very quickly. If done properly, you will see no bleeding at all. If you do trim them a little short, and get into the inner core, you may get some bleeding. This is nothing to be concerned about, as it won’t bleed excessively, and will soon stop on it’s own.

Notice how the bird is immobilized in the towel with only his head and feet hanging out. This will allow you to work on your bird without assistance.

Spur before trimming.

While gripping the spur firmly, begin to make your cut. Notice how I hold both the leg, and the spur at the same time.

This is what you should end up with after being cut, and as you can see, the spur is very blunt. This is the best option to help keep your hens from getting damaged from being topped.

Twisting off the spur is a little more difficult in my opinion. You may have had people tell you to use a potato, or some other method, but you don’t need anything special to twist them off. What you are doing by twisting off the spurs, is removing the outer husk from the inner core completely. To do this, follow the method above to immobilize the bird, then hold the bird by the leg where the spur is attached. Take a pair of ordinary pliers and grip the spur approximately where the inner core ends, and rock the spur gently side to side to help break it loose. Once you feel the spur start to loosen, use the pliers in a twisting motion to pop off the outer husk. What you will end up with is the soft inner core of the spur. You will see some blood, but it is typically minimal. After a few days, the spur will harden up, and you will have a stag sized spur again.

Spurs that have grown long after being trimmed before.

Hold the leg firmly as you begin to remove the outer casing, notice the placement of the pliers, if you get them too close to the leg, you will have trouble twisting them off.

Both spurs have been removed, you can see them laying on the floor next to the legs.

Trimming toenails is another thing you can do to help protect your hen’s backsides. It also will need done to fowl that are raised on wire, because they don’t wear down the toenails naturally as they would if they were raised on the ground. It’s really easy to do with no bleeding, as long as you do it right. To start, you will need to immobilize the bird in the same fashion I already described, and a pair of dog toenail clippers. Some breeds have dark nails, and some have lighter ones. The lighter ones are much easier to do since you can see the vein in the nail. The vein is like the quick in a dog, if you hit the vein while trimming, it will cause some bleeding. On the chickens with light colored nails, it is easy to see where the vein is, so just cut enough that you don’t hit it. On the dark nails, I find it best to hold them up in the light to trim. It can be tricky with really dark ones to see, but by holding them against a light source, it will help you see where you need to cut. It is best to leave them longer if you are not sure where to cut, than to cut too close. If you do cut too far back, and get some bleeding, it will stop by applying pressure. Even if you still see some bleeding after that, don’t worry too much as it will quit on its own.

Toenails in need of trimming.

Find your placement for the cut by watching where the vein ends in the nail.

After the nails have been trimmed.

Some additional notes: Trimming both the spurs, and toenails will definitely help keep your hens from getting damage from them when being topped, but something that is just as important is your hen to rooster ratio. Too many roosters can literally kill your hens from being topped too much, even after being trimmed. Some breeds of chickens are worse than others for this, but as a rule of thumb, one rooster can top several hens without a problem. Also, you can run into problems with abnormally submissive hens. Hens like this will drop to be bred just by the sight of a rooster getting close. When this situation happens, the hen will be over bred, and can easily be damaged from this. There isn’t much you can do about this situation except to keep roosters away from them, put a chicken saddle on her, or what I do, cull her out. This is not a desirable trait, so I prefer to not breed off them. Something else you may run across, are hens that are spurred. I prefer to leave the spurs on the hens, as they won’t hurt anything to let them keep them, and having spurs will help them defend their chicks, especially if they are free ranging. Another thing to consider if you are free ranging is to not trim the spurs on your rooster for the same reasons. A good rooster will help protect your flock, and chicks as well, and having spurs will help him do this. Now saying this, if you let them get too long, they will start curling to the point it won’t help, and will actually hinder him walking properly. This is where twisting off the spur is the better choice, because by doing this, the spur will harden back up to a weapon for the rooster to use for defending with. Either way, you will have to make your own decisions when deciding whether or not to trim your birds, but hopefully this information will help you make that decision. If you want to learn more about this, or any other issues with the caring of your fowl, check out our forum for this at www.ultimatefowl.com.

22
Jan
09

Dubbing

By Randy Stevens
As published in Backyard Poultry Magazine

Dubbing is the practice of removing the comb, and the wattles of your fowl, to help prevent frostbite, and the complications that come with it. If you live in a area of the country that experiences below freezing temperatures, you might want to consider dubbing an option to prevent this, because it can lead to serious infections, fertility problems, permanent tissue damage, and even death. It does not hurt the bird to do this, and will make your whole flock healthier in the long run. Like many things that concern chickens, everyone has their own methods of dubbing, and along with that, different reasons for doing it. Birds, like the Old English Bantams, require dubbing to meet the standard for showing them, and some people like to dub their birds at a specific age, to help control the size of the adult bird. I dub all my fowl, including the hens, to promote better health, and prevent them from getting frostbite, which can be a real problem where I live.

Photobucket

To get the best results, dubbing is primarily done when chickens reach breeding age, and their combs and wattles are pretty much full grown. The first thing I make sure of when I am going to dub birds, is to do it at the right time of the month, so the bleeding is kept to a minimum. It is best to dub a bird the last two, or three days of the moon cycle, just before the new moon. This puts the blood of the bird more in the feet, and less in the head of the bird. I also prefer to do it in the evening, when the birds are calm, and will not be doing a bunch of running around after they are dubbed. It is best to avoid doing it during the hot summer months too, because the heat thins the blood. It is also a good idea to take the water away from the bird you plan on dubbing the day before, so their blood will be thicker, and will clot better. Some people also supplement Vitamin K to their birds prior to dubbing, by feeding alfalfa meal in with their normal feed, or using red cell in the drinking water. Others swear by dunking the birds’ head in a cold bucket of water before, and after dubbing too. All of the things I mentioned are meant to help keep bleeding to a minimum, and any of them will help, but they aren’t required. I have seen many a bird get dubbed without following the above steps, and do just fine, but I am trying to provide you with tips to make the process easier on you, and your fowl.

Photobucket

After deciding on a day, the next thing to do is to prepare to do it. You will need a very sharp, high quality pair of scissors that are capable of cutting through the flesh. I use a pair of leather trimming shears, but some people buy scissors specifically made for this. You can purchase them from most high quality poultry supply companies. I can say, don’t skimp on this, as it makes it much easier to dub a bird if you have a good pair of scissors. You will also need some rubbing alcohol, a towel, and some blood stop powder (You can use flour for this too, if you don’t want to spend the big bucks for the blood stop powder.) Next, you will need to decide what you are going to dub. I dub my combs tight to the head most of the time, which is as close as I can, because I like the look it gives my birds, and I remove the wattles and earlobes too, if they are excessively long. Most people dub the comb approximately a quarter inch off the head, and the wattles, and earlobes tight. The birds that have the worst problems with frostbite, are the tall, straight combed birds. Pea combed fowl need to be dubbed too, but most rose, and walnut combed birds are tight enough to the head, that you shouldn’t have a problem with them.

Photobucket

Once you decide how you are going to dub your bird, you need to take your bird to an area for doing this, preferably outside, as you will get some blood. Take your towel, and spread it out on your work area, grab your bird by the feet with one hand, and cradle the breast with your other hand. Lay the bird at one end of the towel, with his head and feet hanging over the edges. Make sure the bird’s wings are tucked in tight, and still holding the feet, roll the bird up in the towel. If done properly, you will have a bird with only it’s head, and feet hanging out of the rolled up towel, and it is unable to move. If you have a helper, it makes this easier, because you can now have them put their hands around the bird, to keep it calm and unable to wiggle loose. If not, I sit down, and put the bird between my legs, and hold it with my knees. You now need to disinfect the area of dubbing, and your scissors, with the rubbing alcohol. You don’t need much, just a damp cloth to clean the comb, and wattles if you desire. Take care not to get alcohol in the birds’ eyes. Ok, at this point, you are ready to start cutting. Remember, you can not replace flesh that you cut off, so if you are not sure what you are doing, it is better to take less off, and trim down to where you want to go, than to take too much off by accident. I like to start at the back of the head. I take the comb between my fingers in one hand, pull it up away from the bird’s head, then place the scissors behind the comb, tight to the top of the birds’ head, and angling up towards the middle of the comb, for the first cut. Once you make the first cut, you will see blood, don’t worry about it, just finish your cutting. Some birds will bleed a lot, some won’t bleed at all, either way, I will talk about what to do about that, after the dubbing process is finished. Next, you want to hold on to the tallest part of the comb left, and pull it tight. Place your scissors parallel to the head, at the distance you have decided on, and make your next cut. You should be done with the comb at this point, unless you need to do some trimming, for cosmetic reasons. If you decide to cut the wattles and earlobes off, now is the time to do it. If your birds have wattles that are over a quarter inch long, I recommend cutting them. These are much easier to cut, as they are thin, but it is very important to not pull on these when you cut them. If you pull them tight, and cut them off where it looks flush, you will end up having a large hole in the side of their necks from cutting too much off. If you do this, don’t worry, it will heal fine, it just looks scary at first, and leaves a larger wound, and will take longer to heal. With cutting the wattles, it is best to cut off less, and trim your way flush to the neck. If properly done, there will just be a slit in the skin where the wattle was. Some people like to trim the earlobes too, but it isn’t necessary to dub them, as it is not an area that will get frostbite typically, unless they are unusually large. If you decide to dub the earlobes, do them the same way you did the wattles.

Photobucket

After you have finished the cutting, you will want to stop any severe bleeding. Most of the time, the bleeding is very minor, and you can just put the bird back in its pen, and it will be fine. If you get a bird that is bleeding excessively, just apply pressure to the area with a clean cloth until it slows down. If you get bleeding that doesn’t want to stop after a couple minutes of pressure, just sprinkle some blood stop, or flour in the wound, and it will help stop the bleeding. The next day, you will want to check the bird and make sure that its nose isn’t plugged with dried blood. If it is, take a moist cloth, and clean it out so the bird can breath properly. It is also a good idea to treat the bird with a broad spectrum antibiotic for a couple of days to help prevent infections. Most dubbings will heal completely within 2 to 3 weeks.  If you have a bird that has frostbite, I dub the bird immediately. Doing this, will keep your bird from getting infections from dead tissue, and they will heal from the dubbing much faster than waiting for the dead tissue to fall off. If the wattles, or earlobes, are swelled to the point that you can’t dub them, I like to cut a slit for the excess blood, and liquids to drain. Usually, after 24 hours of draining, the swelling will have went down enough that you can dub them.

Photobucket

Along with worrying about the head of your fowl, you need to think of your bird’s feet too. Make sure that your roosts are wide enough, that when they are on them, their breast feathers cover their toes. I use 2×4 lumber for my roosts, thin side up for bantam sized birds, and the wider side up for larger breeds. Doing this, will virtually eliminate loosing toes. Chickens can handle the cold surprisingly well, even better than they can handle extreme heat. If you have a spot for them to get out of the elements, keep them dubbed, and have nice wide roosts for them, they should be able to handle just about anything!

Photobucket

29
Dec
08

Buckeyes

By Chris McCary

The Buckeye is a dual purpose breed and as its name implies, it heralds from the State of Ohio originating sometime before 1896. It is the only American breed with a pea-comb. The Buckeye also has the distinction of being the only breed of chicken created entirely by a woman, Mrs. Nettie Metcalf in Warren, Ohio. It was admitted to the American Poultry Association’s (APA) Standard of Perfection in 1904. Mrs. Metcalf’s Red Fowl creation pre-dates the introduction of the Rhode Island Red to her Mid-Western area.

Mrs. Metcalf set out to create a large red fowl. She began by first crossing a Buff Cochin male to Barred Plymouth Rock females. She then crossed the half Cochin pullets with a Black Breasted Red Game male she acquired the next year, probably of Oriental ancestry and genetically Wheaten or dark Wheaten in color. She took the red offspring of this mating to create the breed.

The Buckeye is a even shade of rich mahogany bay in color. Its feathering is tight much like the other breeds in the APA’s American Class of birds. The Buckeye has a distinctive slate colored bar in the under-color of its back. This bar of slate under-color was meant to enhance and deepen the outer mahogany bay. The mahogany bay covers the entire body of the Buckeye with the exception of the unexposed primaries and secondary wing feathers and the tail feathers which may contain black.

Reddish medium size eyes set on a face that has a “bold expression” on a well arched neck, its head “well-up.” The Buckeye’s yellow beak is short and shaded with a reddish horn.

The Buckeye’s muscular thighs and wings are situated on a body with a long broad back throughout its length. This is coupled with equally broad and deep rounded breasts which are carried above the horizontal giving the bird an almost square-like appearance. The Buckeye has yellow legs. The Buckeye also appears heavy and full. This appearance is not deceiving as the Buckeye Rooster weighs in at a hefty 9 pounds and the Buckeye Hen at 6.5 pounds. Because of this appearance, many mistakenly believe the Buckeye has Cornish in its background, but the Buckeye was not created using any Cornish blood. Mrs. Metcalf only desired to attain the appearance of the Cornish as it appeared around 1905, which is radically different from the Cornish of today.

The Buckeye is an extremely active fowl. Indeed, it has been called the most active of the American breeds. This high level of activity is not without purpose as the Buckeye is highly admired and regarded for their excellent foraging habits. The Buckeye will actually stalk, hunt and pounce on mice with some describing them as almost catlike in this ability. However, the Buckeye does not tolerate confinement as well as some other breeds. The Buckeye overall is also one of the hardiest breeds. Due to their medium size pea comb that is “set closely on the head,” they are especially touted for their cold hardiness.

The Buckeye is an unusually friendly breed and is the first to come running and greet you first thing in the morning. They have a profound and remarkable curiosity. Most of the Roosters are usually friendly toward their human owners but some can become quite aggressive at times. The Buckeye Rooster makes a variety of calls and sounds even emitting an occasional and unusual sound described by some as a “dinosaur roar.”

The Buckeye is moderate to slow to mature but is known as producing a very good meat carcass of mostly dark, rich meat with a whiter than usual white meat. The Buckeye Hen is also a good layer and is known to even surpass the non-production Rhode Island Red Hen. The Buckeye Hen is also capable of going broody. She lays a large, brown egg.

Although is has been referred to as a “Sporty Rhode Island Red,” the Rhode Island Red was not used in the Buckeye’s creation. Upon hearing about the Rhode Island Red’s on the East Coast of the United States in 1896, Mrs. Metcalf decided to call her creation, at first, the “Pea-Comb Rhode Island Red.” She even traded some stock with early Rhode Island Red Breeders.

The Buckeye has never been a widely popular breed. Ms. Metcalf discovered early on that her renaming and designation of her Buckeyes as “Pea Comb Rhode Island Reds” after hearing of the Rhode Island Red’s creation in the East actually served to diminish the Buckeyes appeal. In a change of heart, Ms. Metcalf decided to return her breed the name of their home, Ohio, the “Buckeye State.”

Many poultry enthusiasts widely believe the Buckeye to be some version of the Rhode Island Red. This is not true. As has been mentioned previously, the Rhode Island Red was not used in the creation of the Buckeye. Although some true pea comb Rhode Island Reds no doubt instantly became Buckeyes upon Mrs. Metcalf’s re-designation and the Rhode Island Red has recently been introduced into some lines to increase genetic diversity, the Buckeye remains a distinctly different breed.

In contrast, the Rhode Island Red of today is a much darker in color than the Buckeye and its feathers will be red to the skin. The Rhode Island Red is oblong in shape and appears almost rectangular. It is a lighter bird, less stocky than the Buckeye. The Rhode Island Red has a single or rose comb.

The Buckeye is considered a very rare heritage breed chicken. Without the collaborative efforts of a few long-time breeders and the American Livestock Breeds Conservancy (ALBC), the Buckeye might well have gone extinct. With the ALBC recent program to help recover the Buckeye and new found enthusiasm among Buckeye breeders, the breed is endearing itself to a new generation and making a comeback.

There are no other varieties except the deep mahogany bay color. The Buckeye does also come in a Bantam size.

For anyone interested in Buckeyes and wishing to become more involved, join our Buckeye Discussion Group to learn more.




Archives

Categories